高工作电压小交流电实验室检测仪（耐弧光实验室检测仪）-（统计机设定）

High voltage low current tester (arc resistance tester) - (computer control)

护肤商品各称称：耐电弧试验机

Product name: electric arc resistance tester

护肤品主要参数：NDH-A

Product model: NDH - A

满足了标准规范：GB/T 1411-2002《固态物体接地板材耐高压得很低直流电电弧焊接发出电的试验检测》（一样IEC  61621-1997）及ASTM D495等规定的条件制作创造的，并具备IEC 149、UL 746A等检验最简单的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

一般支持时间范围及功效：

本耐压机是采用APP于主轴电机、电器设备开关和家里用的电器设备开关等领域的电工维修用pp塑料件、硅胶粘合剂胶和隔热性层漆等隔热性层文件的耐弧光焊接耐腐蚀性评估，主使用于液体隔热性层文件如：pp塑料件、复合膜、硅胶粘合剂、黑云母、陶瓷制品、玻璃钢、隔热性层油、隔热性层漆、纸箱等有机溶剂的耐弧光焊接耐腐蚀性测试方法；

本检测机由估算机把控好运动，能够表明所选调查心态及调查时光，调查完结后并上传所选调查数据报告，并可word打印.标淮研究报告范文。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为两边整体机构，下方为使用体统，上方为试验检测箱。

2 本设备经由*新智能化操控高技术，经由选择小程序（IEC或ASTM）可自动式去应力测试，并在台式安卓手机显视试验报告的时候和最终结果。

3 **性能方面好，抗干涉程度强，自测gps精度提高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断耗时不确定度：少于 ±10ms

2 调压器功率：2kVA

3 额定负载现场实验电流值：12.5kV

4 试验台电流值精度等级：±3%

5 电流大小管理精准度：±10%  电压电流估测精准度：1.5%

6 金属电极对试件材料负压：（0.5±0.05）N

7 电级建材：钨棒

8 参比电极距里：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 实用生态高温：（23±2）℃

10 利用氛围含水率：（50±5）%

11 24v电源：220V±5%  50Hz  10A

12 做实验的时候    手段：   行业标准/美标/10 mA 重复/20 mA 连续性/30 mA连续不断/40 mA反复

13 做实验的时候软件一下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 產品尺寸：

NDH-A    耐电弧焊接冲击试验仪-微机调控

NDH-B    耐焊弧试验报告仪-触控屏有效控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！